I solved an issue connecting TBolt directly to the PCIe Serial Card.
Previously I was using DigiKey PortServer device. Strange that it was
working OK for long period of time.
May be some recent MS update did something for the driver. Will
investigate it later.
Now I could see the sat. information on LH screen. As well there is no
"empty screen" any more ! Thanks everyone for support !
Regarding the date/time - personally I am using "chronyd" with 1PPS
interface via RS232. This setup works perfectly fine for my lab.
210 Number of sources = 5
.- Number of sample points in measurement
set.
/ .- Number of residual runs with same
sign.
| / .- Length of measurement set
(time).
| | / .- Est. clock freq error
(ppm).
| | | / .- Est. error in
freq.
| | | | / .- Est.
offset.
| | | | | | On
the -.
| | | | | |
samples. \
| | | | | |
|
Name/IP Address NP NR Span Frequency Freq Skew Offset
Std Dev
==============================================================================
PPS0 6 3 81 -0.000 0.029 -2ns
208ns
ntp2.torix.ca 13 9 224m +0.097 0.285 -1578us
1085us
ntp3.torix.ca 20 9 327m +0.219 0.142 -1167us
951us
time.allover.co.za 6 5 85m -0.368 2.634 +1947us
1074us
206.108.0.134 6 5 102m -0.149 0.735 -3899us
422us
On 2017-08-08 18:14, Chris Albertson wrote:
On Tue, Aug 8, 2017 at 10:11 AM, paul swed <paulsw...@gmail.com>
wrote:
But the TBolt will not ever on its own be correct.
For frequency and 1 pps not an issue. For NTP unfortunate.
By the way my TBolt fired up and tracked satellites without any
trouble at
It would be nearly trivial to write a t-bolt specification reference
clock for NTP. The driver would correct the date the same way LH
does. Maybe six lines of C code max.
--
Chris Albertson
Redondo Beach, California
--
WBW,
V.P.
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
