Re-moin,
On Wed, 16 Aug 2017 14:01:02 +0200
Christoph Kopetzky <[email protected]> wrote:
> I found one manufacturer which has nearly similar connectors in his
> program: htk-jp.com
> They have SDR and HDR connectors on stock but all of them do have 0.8 mm
> pitch. The
> original Molex 52660-2651 connector has 1.0 mm pitch so that would not
> fit...
If you cannot find anything that fits, you can always unsolder the connector
and replace it with something that is still being sold. There should be quite
a few connectors out there, that have a solder pitch of 0.5mm. Though
it would definitely take some time to find a good fit.
Attila Kinali
--
It is upon moral qualities that a society is ultimately founded. All
the prosperity and technological sophistication in the world is of no
use without that foundation.
-- Miss Matheson, The Diamond Age, Neil Stephenson
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
