My doubler circuit is just a 74HC86.  One gate connects to the input 10 MHz 
signal  and is used as the squarer / buffer.  I'm using the squarer from the 
LPRO-101 manual / Wenzel web site.  It can be configured as either version 
shown in the LPRO manual, or a hybrid of the two.

Two gates are used as a delay line.  The squared signal and the delayed signal 
go the 4th XOR gate.  The output is a narrow pulse that clocks a 74AC74 D flip 
flop to get complementary 10 MHz outputs.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

Reply via email to