Hi Guys I have just bought 2 kinds of PRS10 connectors on taobao.com. (PCB type and cable type, refer to the attached photo). It is about 8$ each(the D-SUB + center RF part). If you are looking for it, I can send you the link off the list.
Yours Li Ang / BI7LNQ ------------------ Original ------------------ From: "Jacques Tiete";<[email protected]>; Date: Mon, Oct 9, 2017 11:37 AM To: "TimeNuts"<[email protected]>; Subject: Re: [time-nuts] PRS10 PRBB Shematics Thanks for the prompt reactions, in the mean time I understood Cannon connectors can be a real pain in the xxx :-) to figure out the right one. Jacques Op 6 okt. 2017, om 23:19 heeft Jacques Tiete <[email protected]> het volgende geschreven: Fellow timenuts, I’d like to find some more info about the SRS “PRBB” breakout board for the PRS10, schematic diagram, parts list (eg. the cannon pcb connector used) and all relevant info. An internet/timenuts research did not turn up anything relevant. thanks & 73’s, Jacques Jacques Tiete [email protected] GSM: 32(0)499 99 83 78 _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
<<attachment: prs10_connector.jpg>>
_______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
