On Mon, Jan 22, 2018 at 4:34 AM, ew via time-nuts <[email protected]> wrote:
> In my opinion the SI 5328 is worth looking at for time nut application, > like offset frequency. My problem is solder ability. Does any one know a > source for an evaluation board or as an alternative a source that would do > a small volume assembly? > > Bert Kehren > There is a development board. It is about $200. Search for SI5328-EVB from the usual places. https://octopart.com/search?q=si5328-evb&start=0 You can download the support software and try it out ahead of time from here: https://www.silabs.com/products/development-tools/timing/clock/si5328-evb-development-kit There have been several discussions about it as part of Leo Bodanar's GPSDOs. Search the recent archives of this list: https://www.mail-archive.com/search?l=time-nuts%40febo.com&q=si5328 Mark _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
