Adrian, et al.
An updated list of PIC dividers:
http://leapsecond.com/pic/picdiv-list.htm
Source code and hex files:
http://leapsecond.com/pic/src/
And, you guessed it, PD60 is the one that divides 10 MHz into 60 Hz (exactly).
Documentation and source code:
http://leapsecond.com/pic/src/pd60.asm
/tvb
----- Original Message -----
From: "Adrian Godwin" <[email protected]>
To: "Discussion of precise time and frequency measurement" <[email protected]>
Sent: Sunday, March 04, 2018 2:57 PM
Subject: Re: [time-nuts] WWV or Net Clock controlled oscillator
> There is indeed a 60Hz out picdiv from Tom Van Baak -
> http://www.leapsecond.com/pic/picdiv.htm. It's not in that list but ask Tom.
>
> I've just used one (modified for 50Hz out) to drive a 1A H-bridge circuit
> that supplies a 12V peak-peak square wave to an old LED clock, replacing
> the original wall-wart.
> It works very nicely, and is driven by the 10MHz output of a cheap surplus
> GPSDO.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
