I dug in deep and there is an adjustment. Thats the great news. The bad news was never able to put the oven back together. It was a mess. The insulation stuff deteriorated. (Might mean over heated oven) The various wires going to the oscillator are wrapped about 4 times around the oven. I am sure the reason is to stop temperature variations but seems painful. Regards Paul WB8TSL
On Sun, Mar 4, 2018 at 11:38 PM, Hal Murray <hmur...@megapathdsl.net> wrote: > > n...@npgcable.com said: > > Does the oscillator have an adjustment? If so, is this somewhat > accessible > > without destroying the assembly? Are there pictures of the oscillator > > assembly? > > https://www.realhamradio.com/GPS-oven-journey.htm > > https://www.realhamradio.com/z3801a-turning-point.htm > > > -- > These are my opinions. I hate spam. > > > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/ > mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.