I kludged up a very simple power line interface (3VAC transformer -> 10K 
resistor -> diode -> PICPET) and fed the (unfiltered) output into a PICPET.   
The PICPET was clocked using a 10 MHz TTL oscillator.  I used Lady Heather to 
capture and analyze the data.  It was measuring the time interval between 60 
cycles on the input waveform and calculating the frequency error, phase, and 

It worked surprisingly well.   Overnight the freq varied over a 0.0475 Hz 
range.   Average freq was off by -0.005 Hz
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

Reply via email to