I know this should be as simple as reading the manual however...
I am using Tera Term with a PC laptop connected from serial port to serial
Data: 8 bit
Stop: 1 bit
Flow control: none
The cable is a DB9 to DB9 "Straight Through" Serial Cable of 6.6 ft length
(New pre-made cable).
Dip Switch 4 which allows manual setting of the Netclock 2 is enabled (on).
It updates the Tera Term window every second in Format 1 (which is the same
as the rotary switch setting) with its current Day, Date, Month, Year as if
the (T)ime command is being issued again and again.
It ignores any and all commands found in the manual.
I'm at a loss.
Donald R. Resor Jr. T. W. & T. C. Svc. Co.
Hammond USA warranty service
"Most people don't have a sense of humor. They think they do, but they
don't." --Jonathan Winters
time-nuts mailing list -- email@example.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.