Tim Lister writes: > It has taken me quite a bit longer that I had hoped but I have finally > published a writeup and howto of collecting raw ublox data, converting > it to RINEX and how to do (or get the NRC experts to do) the > post-processing. It's at a new website I have setup: > https://adventuresinprecision.space/howtos/precise-gps-positions/ > Please let me know any comments or suggestions you have to improve it > or make it more comprehensible and comprehensive.
Thanks for taking the time to write that up. Out of curiosity, how far away from the RINEX coordinates is an RMS or median of the original coordinates as recorded by the GPS and how does the convergence curve look like? I'm trying to gauge how long I need to run my timing module in survey modeā¦ Regards, Achim. -- +<[Q+ Matrix-12 WAVE#46+305 Neuron microQkb Andromeda XTk Blofeld]>+ Wavetables for the Waldorf Blofeld: http://Synth.Stromeko.net/Downloads.html#BlofeldUserWavetables _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.