Ole! On Fri, 18 May 2018 20:31:22 +0200 Ole Petter Rønningen <opronnin...@gmail.com> wrote:
> Just a heads up, in case you’re not concious of the fact; at least my > HP splitter (can’t recall model# off hand) is strictly L1 - many > others are wide band and will allow L2 and whatever else you might > later want. I have had good luck with cheap chinese wide-band splitters. No problems with L1, L2, GLONASS and more. Like this one for $23: https://www.ebay.com/itm/RF-coaxial-Power-Splitter-Divider-Combiner-SMA-2-way-800-2500MHz-signal-booster/282970977753 Also, mostly good luck with cheap Chinese DC injectors. Some have had bad solder joints, easily fixed. These have been good, for $9: https://www.aliexpress.com/item/RF-Isolator-Bias-Feeder-Bias-Tee-10MHz-3GHz/32848444588.html What I have not had luck with yet is finding a cheap LNA so I can recover the gain lost in the splitters. The ones I have tested so far have all seriously degraded my SNRs. Anyone know of a cheap and good L1/L2/etc. LNA? RGDS GARY --------------------------------------------------------------------------- Gary E. Miller Rellim 109 NW Wilmington Ave., Suite E, Bend, OR 97703 g...@rellim.com Tel:+1 541 382 8588 Veritas liberabit vos. -- Quid est veritas? "If you can’t measure it, you can’t improve it." - Lord Kelvin _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.