Yo Bob!
On Sun, 20 May 2018 22:53:37 -0400
Bob kb8tq <kb...@n1k.org> wrote:
> If you look at the section under “timing (page 79)” in the uBlox
> manual you will find all the fun stuff that makes the T different.
> One of the timing messages includes the time offset between the pps
> output and the real GPS time solution. Page 351 and after are the
> time related commands. The stuff back around page 358 looks like it’s
> got the sawtooth data in it.
Yeah, which does me zero good real time. I'm putting the PPS into a
TICC. My TICC has not way to accept real time corrections. So that
does me no good, except as a post processing step.
> Bottom line is that with the sawtooth correction applied, you can get
> down to below 1x10^-9 at one second on your plot.
Yeah, which does me no good real time.
> The T version will
> automatically output the magic message with the data in it.
Not seeing it by default.
RGDS
GARY
---------------------------------------------------------------------------
Gary E. Miller Rellim 109 NW Wilmington Ave., Suite E, Bend, OR 97703
g...@rellim.com Tel:+1 541 382 8588
Veritas liberabit vos. -- Quid est veritas?
"If you can’t measure it, you can’t improve it." - Lord Kelvin
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
