How about an ICS525 or ICS527. IDT’s calculator allows a 0 ppm frequency error. You would need a sine-square converter for input.
> Le 30 sept. 2018 à 05:57, Tom Van Baak <[email protected]> a écrit : > > What's a clever, simple, reliable (pick 2 of 3) way to get 16 MHz out of 10 > MHz? Low phase noise isn't a big requirement and jitter doesn't need to be > sub-nanosecond. The main requirement is perfect cycle count accuracy. This is > for driving a 16 MHz microcontroller from a 10 MHz Rb/Cs/GPSDO. 10 MHz input > is likely sine; 16 MHz output is 3v3 or 5v CMOS. > > Thanks, > /tvb > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com > and follow the instructions there. People have only as much liberty as they have the intelligence to want and the courage to take. Emma Goldman _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.
