David, Just to see if your setup is working:
1) Set the pulse generator to as fast a risetime as possible; ns or less. Use a low pulse rate (100 Hz is fine). 2) Use a BNC tee at the generator, into two equal 2 meter cables, each one into a 5370B input. 3) Set manual trigger, 50R, 1.0 V, DC 4) Now collect time interval data in block/stats mode. You should see a mean of under +/-1 ns and a stdev in low ps. /tvb _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.
