On 12/4/18 12:21 PM, Bob kb8tq wrote:
Hi
We’ve been chatting about how drop dead simple it is to spend a couple minutes
and come
up with a SDR for the new modulation for …. ummm ….. errr …. how many years
now? :)
So far not a lot has turned up.
if someone will digitize the signal at some reasonable data rate and bit
depth and send me some minutes of data, I'll see if I can code up a
simple decoder that would run on a low end processor.
It's just BPSK at 1 bit/second, after all.
I maintain that it's the lack of a cheap RF front end that is the sticky
point.
Bob
On Dec 4, 2018, at 3:14 PM, Poul-Henning Kamp <[email protected]> wrote:
--------
In message <[email protected]>, "David G.
McGaw" writes:
BTW, I have been told it has also been successfully tested for lock in Brazil.
Is there anyone in Australia want to give it a try? Perth is almost directly
opposite Fort Collins. :-)
Write a WWVB extension to KiwiSDR so you can try it all over the world ?
--
Poul-Henning Kamp | UNIX since Zilog Zeus 3.20
[email protected] | TCP/IP since RFC 956
FreeBSD committer | BSD since 4.3-tahoe
Never attribute to malice what can adequately be explained by incompetence.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to
http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to
http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to
http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.
