Hi You have a *ton* of digital this and that all on a common ground with the RF output. The original specs didn’t sweat the spurs so the designs are what they are. The OCXO’s are down in the -130 dbc/Hz range at 10 Hz offset. The Rb’s ten’s of db worse. Nobody seemed to mind ….
If you go back about 10 years in the archives, you can find a lot of the data on these parts. Bob > On Feb 12, 2019, at 8:58 PM, Hal Murray <[email protected]> wrote: > > > [email protected] said: >> None of the GPSDO’s out there are great for multiplying direct to microwaves. >> It’s not so much the phase noise as all the spurs (though phase noise does >> vary a bit). > > Where do the spurs come from? > > > > > -- > These are my opinions. I hate spam. > > > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.
