Good morning, Anders. You have a mangled URL on your below referenced wiki page. The CASPER site link should be " https://casper.berkeley.edu/wiki/16_way_1PPS_driver"; (drop the 's' in 'wikis').
Thanks for the marvelous collection! -Pat >Date: Sun, 17 Mar 2019 20:00:57 +0200 >From: Anders Wallin <[email protected]> >To: Discussion of precise time and frequency measurement < [email protected]> >Subject: Re: [time-nuts] Distribution amplifier for 10MHz and 1 pps >Message-ID: < capnvnrwzqjwhlhhrcntlab-kpbm6jon8aiowq9g5--aut_9...@mail.gmail.com> >Content-Type: text/plain; charset="UTF-8" > >I've tried to collect links to frequency/pulse distributor designs over >here: >https://www.ohwr.org/project/pda-8ch-fda-8ch/wikis/Similar-Projects >if something good is missing let me know! >AW > > > But how do I do this > on 10MHz side? I'd like to have minimal distortion > (sine wave) and high isolation. I acquired a few signal > splitter and monolithic amplifiers. Split first and > amplify? Amplify first and split? Remember it's only > 2 to 3 channels. Amplifier module has too much gain, so > I'll probably have to use attenuators. > > > > > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.
