I'd be curious in these numbers as well. When I used to deal with this type of an issue for a living I typically didn't worry much about consistent delays of well under a millisecond.
I'd be curious to know what the typical numbers are. Mark Spencer [email protected] 604 762 4099 > On Mar 22, 2019, at 10:22 AM, Hal Murray <[email protected]> wrote: > > > [email protected] said: >> The infrastructure is easily enough interfaced to, even a simple >> microprocessor can do it, using switches allows for distribution with known >> characteristics. > > It would be interesting to measure the delays through a switch. > > The switches are retiming the data stream. It has to buffer up enough data > before it starts sending to make sure that it won't run out before the end of > packet if the switch clock is fast and the source clock is slow. There is > also bit/byte synchronization, and crossing a clock boundary before things > get > started. > > > > -- > These are my opinions. I hate spam. > > > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.
