Hi If there is no documentation on the protocol the boards are sending, then anything you see on a screen is a guess. The unit may be saying “survey in mode 3” and that gets guessed as “unlocked”. Without a protocol definition, this gets really crazy.
Bob > On Apr 11, 2019, at 3:22 AM, Taka Kamiya via time-nuts > <[email protected]> wrote: > > Not knowing if what I am seeing is normal or not is hard to accept. > Housekeeping "hold" does sound feasible, although why showing up as unlocked > is a mystery. I also don't know what I'm seeing really is unlocked status. > Graph shows red bar, status says "normal". Huh? > > --------------------------------------- > (Mr.) Taka Kamiya > I'm stuck in a wormhole.... Hello, worms! > > On Thursday, April 11, 2019, 2:04:34 AM EDT, Mark Sims > <[email protected]> wrote: > > Unless you have a really crappy antenna setup, I doubt it is a signal level > problem. > > These receivers do like to do the "holdover" thing. No telling if those are > real holdovers, though... no documentation. It could be that the device is > going into some house-keeping mode... who knows? > > Also try to force a self-survey (SS keyboard command). > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com > and follow the instructions there. > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.
