Surface tension keeps the liquid Rb in place in the short term. In the long term, the Rb has to be designed to have place where the Rb was concentrated to be at the lowest temperature. In the HP10816, this place was the "tip-off" for the cell. We tried to heat sink the tip-off to cool it off. The big problem would be if Rb condensed on the cell and blocked some of the light, causing a frequency error.
Another issue was the "flooded cell" vs the "starved cell". There is no liquid Rb in the starved cell. In 2020 hindsight, we really didn't know what we were doing, and the 5065 designers were no longer around to coach us. Rick On 7/23/2019 7:45 AM, Dana Whitlow wrote:
It seems to me that the basic operation of the Rb cell and/or the filter cell and lamp must all involve the presence of some liquid Rb at normal operating temperatures. Otherwise, temperature regulation would not be a viable means of controlling the Rb concentration on the vapor mix. If I'm right about this, is there a concern that operating the device in an inappropriate orientation might lead to liquid "puddling" in some area that is harmful to either operating stability or operating lifetime? Or is it that the amount is so small (~100 ug according to what I've read) that it just doesn't matter? Thanks, Dana K8YUM _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.
_______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.
