I have two of these. They are both 5/8-11, however they were both tapered. The taper can be removed with a hand tap.
Denny > On Oct 29, 2019, at 15:01, Bob kb8tq <[email protected]> wrote: > > Hi > > The ones I’ve seen all thread fine onto the standard survey poles. I believe > that is a > 5/8-11 thread. > > Bob > >>>> On Oct 29, 2019, at 7:54 AM, David C. Partridge >>>> <[email protected]> wrote: >> Hi all, >> I just received one of these and of course it doesn't fit the Shakespeare >> 4705 Adapter (1" mast to 1" 14tpi UNS) which fitted my old antenna, as it's >> way smaller than that (somewhere around 5/8") >> Does anyone know: >> a) What thread it actually is? >> b) If an off the shelf adapter from either a 1" pipe or 1" 14tpi UNS male to >> this thread is available and if so what/where? >> Many thanks >> David >> _______________________________________________ >> time-nuts mailing list -- [email protected] >> To unsubscribe, go to >> http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com >> and follow the instructions there. > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.
