Hi If my survey poles have tapered ends that’s very non-obvious. I have threaded these (and other survey antennas ) onto normal thread rod without any issues.
Indeed the threads can be a bit “tight” the first time. That seems to be more from loose manufacturing tolerances than any deliberate tapering. Bob > On Oct 29, 2019, at 11:01 PM, Denny Page via time-nuts > <[email protected]> wrote: > > I have two of these. They are both 5/8-11, however they were both tapered. > The taper can be removed with a hand tap. > > Denny > > >> On Oct 29, 2019, at 15:01, Bob kb8tq <[email protected]> wrote: >> >> Hi >> >> The ones I’ve seen all thread fine onto the standard survey poles. I believe >> that is a >> 5/8-11 thread. >> >> Bob >> >>>>> On Oct 29, 2019, at 7:54 AM, David C. Partridge >>>>> <[email protected]> wrote: >>> Hi all, >>> I just received one of these and of course it doesn't fit the Shakespeare >>> 4705 Adapter (1" mast to 1" 14tpi UNS) which fitted my old antenna, as it's >>> way smaller than that (somewhere around 5/8") >>> Does anyone know: >>> a) What thread it actually is? >>> b) If an off the shelf adapter from either a 1" pipe or 1" 14tpi UNS male to >>> this thread is available and if so what/where? >>> Many thanks >>> David >>> _______________________________________________ >>> time-nuts mailing list -- [email protected] >>> To unsubscribe, go to >>> http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com >>> and follow the instructions there. >> >> >> _______________________________________________ >> time-nuts mailing list -- [email protected] >> To unsubscribe, go to >> http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com >> and follow the instructions there. > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.
