Good day Hal Thank you for your contribution
The physical setup is as follows, each Rp1 has 2 or more cameras attached to it via a multiplexer or usb depending on the camera, there are a number of V2 RPi and also a couple of USB cameras attached to some of the RPi's. All the equipment is powered by solar I will be able to run cable but it is going to be difficult plus the possibility that the cables and equipment attached to it will be stolen is 100% hence the WiFi Yours sincerely Anton On Thu, Dec 5, 2019 at 3:01 AM Hal Murray <[email protected]> wrote: > > [email protected] said: > > The cameras are pairs sitting on a multiplexer so the problem is not the > > camera pair synchronization but the RPi synchronization > > I don't understand the physical setup. Is it possible to run a cable to > wherever you need good time? > > Even if that isn't practical in the long run, it might be useful for > experimenting. > > > -- > These are my opinions. I hate spam. > > > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.
