Hi I agree that it shouldn’t be something that happens. That’s why half the house going dark was a bit weird …..
Bob > On Mar 31, 2020, at 10:53 AM, Chris Caudle <[email protected]> wrote: > > On Tue, March 31, 2020 8:28 am, Bob kb8tq wrote: >> If you have a two phase circuit, are both phases of interest? > > If you are referring to residential power, a single how would be single > phase center-tapped, as far as I know you never get two phases to a single > residence. The houses in a neighborhood may be split up among a high > power three phase feed, and an industrial facility will have a three phase > feed and have to balance the loads within the facility, but house wiring > all assumes single phase (either half of the transformer secondary for > 120V loads, or across the full winding for 240V loads). > > With that design I would expect there to only be as much difference > between the two legs as you have difference in loading between the two > halves of the transformer winding, since they share a common primary. > > -- > Chris Caudle > > > > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.
