Hi Yes, I have used all the parts I mentioned. They all had the right spacing / right number of pins.
I have no idea what the spec drawing on the 520-201 is trying to show. Bob > On Apr 11, 2020, at 12:42 AM, Robert DiRosario <ka3...@comcast.net> wrote: > > Have you used the Mouser part you listed? When you look at the spec sheet it > only shows 8 of the 15 pins installed in the connector. > > https://www.mouser.com/datasheet/2/123/307-030-520-201_-_EDAC_Card_Edge_Connector-1653445.pdf > > > I have used this, and it show all the pins installed: > > https://www.mouser.com/datasheet/2/123/305-030-500-202_-_EDAC_Card_Edge_Connector-1652975.pdf > > > Graham / KE9H listed: > > https://www.mouser.com/datasheet/2/123/306-015-500-102_-_EDAC_Card_Edge_Connector-1653038.pdf > > which also shows all of the pin installed. > > Why would they not install all of the pins? If they do install all of them > why do they show some missing, when they show them installed on the other two > products? I would like to use the through hole pins socket. > > Robert, KA3ZYX > > On 04/08/2020 10:06 PM, Bob kb8tq wrote: >> Hi >> >> The connector is a very normal 2 x 15 position 0.156” spaced edge connector. >> You can buy them on Amazon: >> >> https://www.amazon.com/gp/product/B0721L5VSD/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 >> >> <https://www.amazon.com/gp/product/B0721L5VSD/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1> >> >> From Mouser: >> >> https://www.mouser.com/ProductDetail/587-307-030-520-201 >> <https://www.mouser.com/ProductDetail/587-307-030-520-201> >> >> From various people on eBay: >> >> https://www.ebay.com/itm/Card-edge-connector-row-30-Pin-3-96mm-pitch-805-slot-solder-PCB-2x15-socket-NMGG/293411808673?ssPageName=STRK%3AMEBIDX%3AIT&var=592241315857&_trksid=p2057872.m2749.l2649 >> >> <https://www.ebay.com/itm/Card-edge-connector-row-30-Pin-3-96mm-pitch-805-slot-solder-PCB-2x15-socket-NMGG/293411808673?ssPageName=STRK:MEBIDX:IT&var=592241315857&_trksid=p2057872.m2749.l2649> >> >> https://www.ebay.com/itm/TRW-Cinch-Connector-252-18-30-301-Lot-of-6/122819145572?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649 >> >> <https://www.ebay.com/itm/TRW-Cinch-Connector-252-18-30-301-Lot-of-6/122819145572?ssPageName=STRK:MEBIDX:IT&_trksid=p2057872.m2749.l2649> >> >> ( ummm …. errr …. no, not that last one, it’s 18 pin … I only counted the >> pins *after* they got here :) ) >> >> or from a variety of other sources. >> >> If you dig a bit there is even a guy selling the full adapter for the 10811, >> (for a crazy price) but not identifying it >> as working with the 10811 >> >> >> Bob >> >> >> >> >>> On Apr 8, 2020, at 9:39 PM, Frank O'Donnell <t...@inkbox.net> wrote: >>> >>> I recently bought an HP10811A oscillator on eBay, only belatedly realizing >>> that it's designed to interface to a 15-contact connector that the manual >>> identifies as a CINCH 250-15-30-210 or equivalent. >>> >>> A search turns up a vendor in Massachusetts called BMI Surplus Inc., that >>> appears to have these in stock in new condition at a minimal price. The >>> only hitch is that BMI's website says they're closed down due to COVID-19 >>> and will not process any orders until their state government authorizes >>> businesses to return. (And at this point, it's anyone's guess when that >>> will be.) >>> >>> To get going with the oscillator, it occurs to me that I could rig up a few >>> small alligator clips and use them on the required contacts for the time >>> being. Any other thoughts or suggestions on how to work this? By any chance >>> are there other known sources for the right size of connector that might be >>> operating right now? >>> >>> Thanks much, >>> >>> Frank O'Donnell >>> South Pasadena, California >>> >>> >>> >>> >>> >>> _______________________________________________ >>> time-nuts mailing list -- time-nuts@lists.febo.com >>> To unsubscribe, go to >>> http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com >>> and follow the instructions there. >> _______________________________________________ >> time-nuts mailing list -- time-nuts@lists.febo.com >> To unsubscribe, go to >> http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com >> and follow the instructions there. > > > _______________________________________________ > time-nuts mailing list -- time-nuts@lists.febo.com > To unsubscribe, go to > http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com > and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@lists.febo.com To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.
