I too posted a similar issue with my F9P on the EEVBlog with the exact same results as you are having. I still don't have an answer for the satellites not showing up in LH.
-----Original Message----- From: time-nuts <[email protected]> On Behalf Of Ben Hall Sent: Thursday, May 28, 2020 16:01 To: [email protected] Subject: [time-nuts] UBlox F9T and Lady Heather Afternoon all, I finally got ahold of a UBlox F9T in the form of the RCB-F9T evaluation module. Got it talking to Lady Heather on an old Raspberry Pi, and everything is working, but the satellite table is blank. Just shows ".." in the PRN column, with AZ, EL, SIG, and DOPPLER blank. Clearly, she's tracking satellites, as the "Tracking sats" message is on and the 1PPS LED is in phase with all the others here. I've been searching thru old posts, the manual, EEVBlog webpage, pretty much any place that has Lady Heather information...and can't figure out what I'm doing wrong. Anyone know what I might be doing wrong? I am using the /rxu switch, have tried toggling different GNSS systems on and off, all with no effect... When I connect the unit to my PC with uCenter, I can see satellite information just fine... thanks much and 73, ben, kd5byb _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.
