Hi There is indeed a version of LH that *does* work just fine with the F9T and F9P parts. A year ago it was a beta …..
Bob > On May 28, 2020, at 7:12 PM, Ben Hall <[email protected]> wrote: > > On 5/28/2020 4:26 PM, Chris Burford wrote: >> I too posted a similar issue with my F9P on the EEVBlog with the exact same >> results as you are having. I still don't have an answer for the satellites >> not showing up in LH. > > Hi Chris, > > I actually came across your post in my searching. ;) > > In an off-line conversation with Gary Miller, he noted that it may be > possible that Lady Heather is unable to use the new UBX-NAV-SAT message that > is used in the 9-series uBlox receivers...and that Heather is looking for the > old UBX-NAV-SVINFO that cannot be enabled on the 9 series. > > I've ensured that I've got UBX-NAV-SAT turned on...but still have no sats in > the LH table. > > Interestingly, I did an experiment where I forced the F9T into NMEA and > forced LH into NMEA (/rxn) and was able to see the SAT table, but it didn't > have a lot of the neat data present that you can get from an 8 series running > UBX binary. > > I'm scratching my head at this point - I came across several posts in my > searching where folks noted that LH was working with the F9P and F9T. > > I'll post back if I figure something out. > > thanks much, > ben, kd5byb > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.
