The description says it’s a TNC female RP connector, and claims it’s the industry standard. Odd, but I haven’t encountered that “standard” connector. Maybe it’s only standard on L1/L2 antennas?
Steve WB0DBS > On Nov 13, 2020, at 3:37 PM, Dana Whitlow <[email protected]> wrote: > > Thanks, Bob. I zoomed in on the image that shows the connector without the > cover, > and it sure looks like a female connector to me (contradicting what the > SparkFun > description says). I could not determine which handedness applies to the > threads, > however- not quite enough resolution in the photo. > > I'm inclined to suspect that this is in fact a standard TNC female > connector. What > possible motive could an industry have for using a non-standard connector > type > except for meeting some silly FCC regulation (which clearly does not apply > here). > > Dana > > >> On Fri, Nov 13, 2020 at 1:34 PM Robert LaJeunesse <[email protected]> >> wrote: >> >> Just spotted this: https://www.sparkfun.com/products/17382 >> >> Datasheet: >> https://cdn.sparkfun.com/assets/6/e/a/9/2/BT-147_GNSS_Antenna_Datasheet.pdf >> >> Chokeplate design, 40dB LNA, TNC connector >> >> _______________________________________________ >> time-nuts mailing list -- [email protected] >> To unsubscribe, go to >> http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com >> and follow the instructions there. >> > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.
