It looks like the L1/L2 antenna that was widely discussed a couple of years ago. I bought one and it is TNC like in the picture. Bought cable with TNC Bert Kehren. In a message dated 11/13/2020 4:37:26 PM Eastern Standard Time, [email protected] writes: Thanks, Bob. I zoomed in on the image that shows the connector without the cover, and it sure looks like a female connector to me (contradicting what the SparkFun description says). I could not determine which handedness applies to the threads, however- not quite enough resolution in the photo.
I'm inclined to suspect that this is in fact a standard TNC female connector. What possible motive could an industry have for using a non-standard connector type except for meeting some silly FCC regulation (which clearly does not apply here). Dana On Fri, Nov 13, 2020 at 1:34 PM Robert LaJeunesse <[email protected]> wrote: > Just spotted this: https://www.sparkfun.com/products/17382 > > Datasheet: > https://cdn.sparkfun.com/assets/6/e/a/9/2/BT-147_GNSS_Antenna_Datasheet.pdf > > Chokeplate design, 40dB LNA, TNC connector > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.
