Sorry for the poor grammar on my post below. Mike B. Feher, N4FS 89 Arnold Blvd. Howell NJ 07731 848-245-9115
-----Original Message----- From: time-nuts <[email protected]> On Behalf Of Mike Feher Sent: Saturday, January 16, 2021 11:10 AM To: 'Discussion of precise time and frequency measurement' <[email protected]> Subject: Re: [time-nuts] Leakage, tinySA There is no birdies on mine that I can see, even as I decrease the RBW. - Mike Mike B. Feher, N4FS 89 Arnold Blvd. Howell NJ 07731 848-245-9115 -----Original Message----- From: time-nuts <[email protected]> On Behalf Of Dana Whitlow Sent: Saturday, January 16, 2021 6:45 AM To: Discussion of precise time and frequency measurement <[email protected]> Subject: Re: [time-nuts] Leakage, tinySA Another data point: My newly-received TinySA has a big birdie at 10 MHz, which is a disappointment since I had hoped to use the unit as a sniffer to track down leaks in my 10 MHz distribution system. This birdie in the TinySA persists even when nothing is connected to the input and does not vary in amplitude when I move around the house, or with time while I'm sitting still with the unit. I, too, received no manual. Dana _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.
