On 22/11/2021 02:29, McFail Troll wrote:
Hi all, I am new to the mailing list, and pretty new to timing stuff in
general. I wanted to ask if any of you folks who have a more advanced
set-up (synchronization via gps/radio, or just a well working rubidium
clock or something) maintain a solid stratum 1 NTP server. Of course, I am
aware that there are plenty of good stratum 1 NTP servers open to the
public (e.g. NIST's servers), but I am curious to see if I could sync up
with some of you guys who seem to have some pretty cool set-ups.
Btw, sorry if this has been asked before on this list. Thanks
You may find some helpful information on my Web page:
https://www.satsignal.eu/ntp/Raspberry-Pi-quickstart.html
about using a GPS/PPS device with a Raspberry Pi. This gets you down into the
microsecond region at a low cost and a low power consumption - helpful as
leaving the device on 24x7 is best.
Be aware that many of the public stratum-1 servers are overloaded and perhaps
not as good as you might want.
Cheers,
David
--
SatSignal Software - Quality software for you
Web: https://www.satsignal.eu
Email: david-tay...@blueyonder.co.uk
Twitter: @gm8arv
_______________________________________________
time-nuts mailing list -- time-nuts@lists.febo.com -- To unsubscribe send an
email to time-nuts-le...@lists.febo.com
To unsubscribe, go to and follow the instructions there.
