Thanks I will definitely take a look. On Mon, Nov 22, 2021 at 4:47 AM David Taylor via time-nuts < time-nuts@lists.febo.com> wrote:
> On 22/11/2021 02:29, McFail Troll wrote: > > Hi all, I am new to the mailing list, and pretty new to timing stuff in > > general. I wanted to ask if any of you folks who have a more advanced > > set-up (synchronization via gps/radio, or just a well working rubidium > > clock or something) maintain a solid stratum 1 NTP server. Of course, I > am > > aware that there are plenty of good stratum 1 NTP servers open to the > > public (e.g. NIST's servers), but I am curious to see if I could sync up > > with some of you guys who seem to have some pretty cool set-ups. > > > > Btw, sorry if this has been asked before on this list. Thanks > > You may find some helpful information on my Web page: > > https://www.satsignal.eu/ntp/Raspberry-Pi-quickstart.html > > about using a GPS/PPS device with a Raspberry Pi. This gets you down into > the > microsecond region at a low cost and a low power consumption - helpful as > leaving the device on 24x7 is best. > > Be aware that many of the public stratum-1 servers are overloaded and > perhaps > not as good as you might want. > > Cheers, > David > -- > SatSignal Software - Quality software for you > Web: https://www.satsignal.eu > Email: david-tay...@blueyonder.co.uk > Twitter: @gm8arv > _______________________________________________ > time-nuts mailing list -- time-nuts@lists.febo.com -- To unsubscribe send > an email to time-nuts-le...@lists.febo.com > To unsubscribe, go to and follow the instructions there. > _______________________________________________ time-nuts mailing list -- time-nuts@lists.febo.com -- To unsubscribe send an email to time-nuts-le...@lists.febo.com To unsubscribe, go to and follow the instructions there.