Without a reference? If the same PPS acts as start and as stop then one (I suppose) rising edge is start and the next rising edge is stop, so a measurement every second is not possible. Maybe a dedicated hardware with two channels where one edge is the start for a channel and stop for the other is necessary.
On Sun, Feb 27, 2022 at 12:08 PM Erik Kaashoek <[email protected]> wrote: > > I'm trying to measure the phase of a 1 second PPS from a cheap GPS > module using a Picotest U6200A > Set up in time/period mode, input 1. Trigger level is set to 1V, DC > coupling, all seems to work well but there is only one measurement every > two seconds which either misses output the in between periods of > averages over two periods. > Does anyone know if it is possible with the U6200A to measure every > period of a PPS? > Erik. > _______________________________________________ > time-nuts mailing list -- [email protected] -- To unsubscribe send an > email to [email protected] > To unsubscribe, go to and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] -- To unsubscribe send an email to [email protected] To unsubscribe, go to and follow the instructions there.
