I was too fast to click send, there is a graphical client for GPSD :
https://gpsd.io/xgps-sample.html
That is OK for me !
Best regards,
Claude
Le 02/03/2022 17:47, [email protected] a écrit :
Hi Wilko and Bryan.
I was the one who asked and I'm also interested in getting more
information, both on your project and using GPSD as suggested earlier.
Thank you,
Claude
Le 02/03/2022 14:06, Bryan _ a écrit :
CAUTION: This email originated from outside your organization.
Exercise caution when opening attachments or on clicking links from
unknown senders.
Hi Wilko:
I was not the OP, but I would be interested in the details of your
project.
Cheers
-=Bryan=-
________________________________
From: Wilko Bulte <[email protected]>
Sent: March 2, 2022 10:41 AM
To: Discussion of precise time and frequency measurement
<[email protected]>
Subject: [time-nuts] Re: GPSDO - GPS1300-10-1000 by RFX Ltd. UK
hello Bryan,
Runnimg LH on a *Pi is feasible without any problems. I have built
such a setup myself, it lives in my shack and is based on a Samsung
UCCM GPSDO (telco surplus obtained in China). The Pi in question is an
OrangePi Zero running Armbian Linux. It runs an Xdesktop on top of a
VNCserver. Obviously LH shows herself on that desktop ;-) This whole
shebang allows running the GPSDO/OrangePi combo to run headless (i.e.
without a display), one can use any VNCclient to check on LH via the
network. Laptop, tablet, even a smartphone can be used to monitor the
GPSDO. The OrangePi has both Wlan as well as wired Ethernet options.
Hope this makes sense, I did an article for Electron, the monthly of
the Dutch VERON ham organisation. In Dutch, for obvious reasons. But
can make it available if there is interest.
Wilko
PA1WBU
On 2 Mar 2022, at 19:21, Bryan _ <[email protected]> wrote:
I have seen a project where ladyheather is run off a PI, suppose you
could just configure LH to display what you need.
-=Bryan=-
________________________________
From: [email protected] <[email protected]>
Sent: March 2, 2022 9:34 AM
To: Discussion of precise time and frequency measurement
<[email protected]>
Subject: [time-nuts] Re: GPSDO - GPS1300-10-1000 by RFX Ltd. UK
Hello to all members.
I want to add to my lab a Pi based display that would show a GNSS SV
map
like the one attached to this message.
Any suggestions ?
Thank you !
Claude VA2 HDD
_______________________________________________
time-nuts mailing list -- [email protected] -- To unsubscribe
send an email to [email protected]
To unsubscribe, go to and follow the instructions there.
_______________________________________________
time-nuts mailing list -- [email protected] -- To unsubscribe
send an email to [email protected]
To unsubscribe, go to and follow the instructions there.
_______________________________________________
time-nuts mailing list -- [email protected] -- To unsubscribe
send an email to [email protected]
To unsubscribe, go to and follow the instructions there.
_______________________________________________
time-nuts mailing list -- [email protected] -- To unsubscribe send an
email to [email protected]
To unsubscribe, go to and follow the instructions there.
