Hi Skip --
I have had no trouble FTPing into two NetRSs from a Linux command line
ftp program. A couple of config settings might be important if you
haven't checked them:
Under "Internet/FTP" make sure "Anonymous FTP" is enabled with
appropriate access rights.
Under "Security" make sure the file access rights are set to
"Unrestricted", and that it's set to listen on port 21.
John
----
On 3/13/22 12:23, Skip Withrow wrote:
Hello Time-Nuts,
I would like to download files from a Trimble NetRS via ftp and seem
to be running into a roadblock.
I'm running NetRS firmware 1.3-2 talking to it with a Windows-10
running a DOS command prompt window.
Issuing an 'ftp IP' (IP = IP address of NetRS) gets a response of
'Connected to IP.' (there is a period after the IP address). Then,
nothing. No prompt asking for user name, and no response to any
keyboard input. Then, after a timeout period, it responds with
'Connection closed by remote host.'
I have tried switching to named versus anonymous ftp on the NetRS.
Have also switched to another computer running Windows-7. Always
behaves the same.
Any suggestions? Has anyone connected to the ftp server on the NetRS?
I have to believe that it works (if you get everything right) as
there are many of these units collecting remote data around the world.
Thanks,
Skip Withrow
_______________________________________________
time-nuts mailing list -- [email protected] -- To unsubscribe send an
email to [email protected]
To unsubscribe, go to and follow the instructions there.
_______________________________________________
time-nuts mailing list -- [email protected] -- To unsubscribe send an
email to [email protected]
To unsubscribe, go to and follow the instructions there.
