Skip Use putty to FTP. I think you have to call out a port. Plus most modern apps want secure FTP. Since the netrs was created thinks have attempted to become more secure. Putty gives you a bit of a handle on this and thats. May help you find the issue. Regards Paul WB8TSL
On Sun, Mar 13, 2022 at 12:45 PM Skip Withrow <[email protected]> wrote: > Hello Time-Nuts, > > I would like to download files from a Trimble NetRS via ftp and seem > to be running into a roadblock. > > I'm running NetRS firmware 1.3-2 talking to it with a Windows-10 > running a DOS command prompt window. > > Issuing an 'ftp IP' (IP = IP address of NetRS) gets a response of > 'Connected to IP.' (there is a period after the IP address). Then, > nothing. No prompt asking for user name, and no response to any > keyboard input. Then, after a timeout period, it responds with > 'Connection closed by remote host.' > > I have tried switching to named versus anonymous ftp on the NetRS. > Have also switched to another computer running Windows-7. Always > behaves the same. > > Any suggestions? Has anyone connected to the ftp server on the NetRS? > I have to believe that it works (if you get everything right) as > there are many of these units collecting remote data around the world. > > Thanks, > Skip Withrow > _______________________________________________ > time-nuts mailing list -- [email protected] -- To unsubscribe send > an email to [email protected] > To unsubscribe, go to and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] -- To unsubscribe send an email to [email protected] To unsubscribe, go to and follow the instructions there.
