Hello, response time: how is it possible to increase the response time on Tinc VPNs. When I use tinc over a fast or giga-bit network connection the ping-response time is normally about 1800 to 2000 ms. Sometimes I get ping response times at about 2.500 to 3.000 ms over a normal Ethernet Connection or a television-cable connection within the same providers-network in the same city. The ping-time on the underlaying network connection is about 10 to 30 ms. So when I use Windows Remote Desktop it is terrible when I have to wait 2 or 3 seconds to wait for a response of the chance of the desktop.
Bandwith: when I use tinc on a fast- or gigabit connection on the same Ethernet network (I have the same problem on a television-cable connection within the same providers-network in the same city) the speed is very slow. The new TAP-Win32 Adapter V9 tells me that there is a network speed of 10 Mbit/s but when I transfer data between two hosts the network is only used by up to 1,5 to 2,5 percent. So the speed is only 150 to 250 kbit/s which is very slow. I use 3 Windows XP and one Windows Vista Notebooks as client and a Windows Small Business Server 2008 as server. On the client-side the config-file looks like this: Interface=Tinc-VPN AddressFamily=ipv4 Mode=switch Name=TincKnoten_PM1860NB PrivateKeyFile=C:/Programme/tinc/ESV/rsa_key.priv ConnectTo=TincKnoten_remote TCPOnly=yes The "tinc-up.bat"-file looks like this: netsh interface ip set address %INTERFACE% static 192.168.19.1 255.255.255.0 The file "TincKnoten_remote" on the client looks like this (without public key): Address=Server's DNS-Name Port=655 Subnet=192.168.19.8/32 Here is the content of the server's tinc.conf: Interface=Tinc-VPN AddressFamily=ipv4 Mode=switch Name=TincKnoten_remote PrivateKeyFile=C:/Program Files (x86)/tinc/ESV/rsa_key.priv TCPOnly=yes The server's "tinc-up.bat"-file looks like this: netsh interface ip set address Tinc-VPN static 192.168.19.8 255.255.255.0 The file "TincKnoten_PM1860NB" on the server looks like this (without public key): Address=Some (not existent) DNS-Name Port=655 Subnet=192.168.19.1/32 IndirectData=yes I hope, somebody can help me to increase the response time and to increase the bandwith. Thank's very much, Johann Stieger _______________________________________________ tinc mailing list [email protected] http://www.tinc-vpn.org/cgi-bin/mailman/listinfo/tinc
