On Wed, Dec 16, 2009 at 5:21 PM, Johann Stieger <[email protected]> wrote: > Hello, > > response time: how is it possible to increase the response time on Tinc VPNs. > When I use tinc over a fast or giga-bit network connection the ping-response > time is normally about 1800 to 2000 ms. Sometimes I get ping response times > at about 2.500 to 3.000 ms over a normal Ethernet Connection or a > television-cable connection within the same providers-network in the same > city. The ping-time on the underlaying network connection is about 10 to 30 > ms. So when I use Windows Remote Desktop it is terrible when I have to wait 2 > or 3 seconds to wait for a response of the chance of the desktop. > > Bandwith: when I use tinc on a fast- or gigabit connection on the same > Ethernet network (I have the same problem on a television-cable connection > within the same providers-network in the same city) the speed is very slow. > The new TAP-Win32 Adapter V9 tells me that there is a network speed of 10 > Mbit/s but when I transfer data between two hosts the network is only used by > up to 1,5 to 2,5 percent. So the speed is only 150 to 250 kbit/s which is > very slow. > > I use 3 Windows XP and one Windows Vista Notebooks as client and a Windows > Small Business Server 2008 as server. On the client-side the config-file > looks like this: > Interface=Tinc-VPN > AddressFamily=ipv4 > Mode=switch > Name=TincKnoten_PM1860NB > PrivateKeyFile=C:/Programme/tinc/ESV/rsa_key.priv > ConnectTo=TincKnoten_remote > TCPOnly=yes > > The "tinc-up.bat"-file looks like this: > netsh interface ip set address %INTERFACE% static 192.168.19.1 255.255.255.0 > > The file "TincKnoten_remote" on the client looks like this (without public > key): > Address=Server's DNS-Name > Port=655 > Subnet=192.168.19.8/32 > > Here is the content of the server's tinc.conf: > Interface=Tinc-VPN > AddressFamily=ipv4 > Mode=switch > Name=TincKnoten_remote > PrivateKeyFile=C:/Program Files (x86)/tinc/ESV/rsa_key.priv TCPOnly=yes > > The server's "tinc-up.bat"-file looks like this: > netsh interface ip set address Tinc-VPN static 192.168.19.8 255.255.255.0 > > The file "TincKnoten_PM1860NB" on the server looks like this (without public > key): > Address=Some (not existent) DNS-Name > Port=655 > Subnet=192.168.19.1/32 > IndirectData=yes > > > I hope, somebody can help me to increase the response time and to increase > the bandwith. > > Thank's very much, > > Johann Stieger > > _______________________________________________ > tinc mailing list > [email protected] > http://www.tinc-vpn.org/cgi-bin/mailman/listinfo/tinc >
My tinc response times are pretty much near wire speeds. i have been using rdp for years but don't replicate your situation yet as i am trying to cross compile tinc on a Fedora OS for windows/mingw . So i am not running tinc on windows. Tinc connects over a 3g connection from a tethered cellphone. rdesktop <--> xrdp <--> MSWin2003 tinc is underneath the two nodes on the left. i am doing double rdp and it is ok. r u on a 64bit Win2008? i compiled the latest tinc from source. _______________________________________________ tinc mailing list [email protected] http://www.tinc-vpn.org/cgi-bin/mailman/listinfo/tinc
