Hi , today i was trying to connect my windows 7 client to my tinc server and i ran into a strange problem :) my tinc server is running tinc 1.0.11 on ubuntu 10.04 in switch mode , and the windows client is running tinc 1.0.13, there is a very strange problem , i tried to connect the windows system , i configured it , and it didn't work , so i ran it in debug mode -D -d5 , and it told me: Got ARP request from buyvm (x.y.z.c port 655) while in router mode! so i looked at the config again , and noticed that i mentioned Mode = switch actually it looks like this : Name = sepehrpc ConnectTo = buyvm Interface = VPN Mode = Switch so i decided to put my server in router mode , i put it to router mode , and everything worked , but then my other client ( ubuntu 10.04 32 , tinc 1.0.11) failed to connect . though i set it on router mode . can anyone help me ? here's my ubuntu's configuration : Name = manwedesktop ConnectTo = buyvm Device = /dev/net/tun Mode = switch PrivateKeyFile = /etc/tinc/vpn/rsa_key.priv
i also should mention that all the clients are using TCPOnly = yes . the server's configuration looks like this : Name = buyvm Device = /dev/net/tun Mode = switch PrivateKeyFile = /etc/tinc/vpn/rsa_key.priv any help would be appreciated , many thanks in advance. _______________________________________________ tinc mailing list [email protected] http://www.tinc-vpn.org/cgi-bin/mailman/listinfo/tinc
