Am 13.01.2015 um 15:58 schrieb Guus Sliepen: > Make sure you have a very good power supply for your Raspberry Pi (get > one that can deliver at least 1.5 A, better get one that can do 2 A). > Even then, it's recommended to run the wireless network dongle from a > separate, powered USB hub. If the power usage is too high, even for a > short amount of time, the voltage can drop below levels that are needed > for the CPU and the SD card to work reliably. This is the most likely > explaination for the crashes you got. yes i know that. i do have sufficent power supply and raspi is running headless with no additional peripherals.
without tinc installed, it runs flawlessly 24/7 via wlan or eth0 or even both. with tinc installed, it runs flawlessly 24/7 via eth0 with tinc still installed, power off, plug in wlan, power on -> booom. so there maybe a serious conflict with other software (network, wpa-gui,..?). sven _______________________________________________ tinc mailing list [email protected] http://www.tinc-vpn.org/cgi-bin/mailman/listinfo/tinc
