Hi all,
I'm experiencing a strange problem.
I have setup 2 gateways which are behind a NAT router.
They are configured in Route mode and have the ips 10.0.0.1/32 and
10.0.0.2/32 on the tinc interface
The also have subnets (192.168.1.0/24 and 192.168.2.0/24 respectively).
Now the odd thing is that when the VPN comes up they both also add the
local subnet to their routes on the tinc interface:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use
Iface
0.0.0.0 10.10.0.254 0.0.0.0 UG 0 0 0
eth0
10.0.0.1 0.0.0.0 255.255.255.255 UH 10 0 0
tin0
10.0.0.2 0.0.0.0 255.255.255.255 UH 10 0 0
tin0
192.168.1.0 0.0.0.0 255.255.255.0 U 10 0 0
tin0
192.168.2.0 0.0.0.0 255.255.255.0 U 0 0 0
eth0
192.168.2.0 0.0.0.0 255.255.255.0 U 10 0 0
tin0
the subnet-up script runs this command:
ip route add $SUBNET dev $INTERFACE metric $WEIGHT
Linux distro is Debian 7, with stock tinc version (1.0.19-3).
Should I filter it in the subnet-up script? I have other installations
which don't create this effect.
Thank you.
Regards,
Alessandro
_______________________________________________
tinc mailing list
[email protected]
http://www.tinc-vpn.org/cgi-bin/mailman/listinfo/tinc
