Il 2015-05-05 15:18 Alessandro Briosi ha scritto:
Il 2015-05-05 13:29 Guus Sliepen ha scritto:
On Tue, May 05, 2015 at 01:18:15PM +0200, Alessandro Briosi wrote:
Now the odd thing is that when the VPN comes up they both also add
the local
subnet to their routes on the tinc interface:
[...]
the subnet-up script runs this command:
ip route add $SUBNET dev $INTERFACE metric $WEIGHT
Should I filter it in the subnet-up script? I have other
installations which
don't create this effect.
Tinc calls the subnet-up script for all Subnets, including those of
the
local node. If you don't want the local ones added, then the following
line will
help:
[ "$NAME" = "$NODE" ] && exit 0
Are you sure the other installations don't do the same thing?
This is not working as the $NAME value is not initialized ...
The name needs to be hard-coded in the script :(
(also the = needs to be ==)
Alessandro
_______________________________________________
tinc mailing list
[email protected]
http://www.tinc-vpn.org/cgi-bin/mailman/listinfo/tinc
