On Tue, Aug 30, 2016 at 02:38:16PM +0200, Armin Schindler wrote: > we use a meshed VPN with TINC to connect 7 offices. > Some office are in other countries and use other ISPs. The connection > between some ISPs (peering partners) are not that good. This means we > have packet loss between those direct connections. > > To avoid this direct connection, I would like to tell TINC to use > a defined other host to route the packets to. > E.g. > instead of doing direct office-1 to office-2, send always packets > for office-2 to office-5 (because connection with office-5 is very stable). > > Is there a way to configure TINC to not use direct connection > for one host, but use a specified, other host for that?
You can set IndirectData = yes in hosts/office-2 on hosts/office-1, and
vice versa, to prevent it from trying a direct connection.
Note that you also should not have ConnectTo = office-2 in office-1's
tinc.conf, and vice versa, otherwise the above will not have any effect.
--
Met vriendelijke groet / with kind regards,
Guus Sliepen <[email protected]>
signature.asc
Description: Digital signature
_______________________________________________ tinc mailing list [email protected] https://www.tinc-vpn.org/cgi-bin/mailman/listinfo/tinc
