I've updated the tinyos-2.x cc2420 stack to support changing of transmission power. The 2.x method is different from 1.x in that transmission power is specified on a per-packet basis using the CC2420Packet interface.
Note: if you are on anonymous access with sourceforge, it may take up to 24 hours to propagate the changes. -- Jonathan W. Hui [EMAIL PROTECTED] http://www.cs.berkeley.edu/~jwhui/ On 3/23/06, Avinash Sridharan <[EMAIL PROTECTED]> wrote: > Hi All, > I wanted to set the power of my radio dynamically (at runtime). I figured > out that the CC2420Config.nc provides such an interface to set the > transmission power and it is implemented in CC2420ControlP.nc. However I am > not able to find any of the generic interfaces (that hide the hardware > specifics) in tinyOS-2.x that are are exposing the full functionality of > CC2420Config.nc (that is the ability to set the tx power of the radios) to > applications. > > Do I need to access the CC2420Control component directly to perform the > above operation ? > > Thanks, > Avinash > > -- > Phd Dept. of Electrical Engineering > University of Southern California > http://www-scf.usc.edu/~asridhar > _______________________________________________ > Tinyos-help mailing list > [email protected] > https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help > > > _______________________________________________ Tinyos-help mailing list [email protected] https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
