When you program your motes, have you programmed them with different node ids like
make tmote reinstall,NODE_ID? - Dongyan On 7/6/06, Jose L. Ponce <[EMAIL PROTECTED]> wrote:
Hello all, My question is very simple: I have 5 motes with the same program installed. This program receives an instruction from the computer and executes it (i.e. "dac output to 2 volts"). I am sending the instruction using moteif.send(MOTEID, message), so theoretically just the mote MOTEID should receive the message. This is not the case, though, and all motes seem to receive the message and execute it. And what's more strange: if I have two motes and I send "set dac to 0xffff" (which should be the maximum, 3 volts) both motes receive the message and each of them has an output of 1.5 volts!! The nodes are connected to the computer through USB and communication is made using this means, not radio. The DAC outputs are connected to an inverter amplifier and this amplifier is connected to a DC-Controlled Dimmer. Could the problem be related to impedances??? Any thoughts on what could be causing this anomaly and how to solve it? Thanks, - Jose. _______________________________________________ Tinyos-help mailing list [email protected] https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
_______________________________________________ Tinyos-help mailing list [email protected] https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
