You might want to check your battery voltage. I ran into the same problem a while ago and it turns out that when the battery voltage is less than a certain value (I remember it's 2.7V) the flash in the MCU can't be re-programed.
- Dongyan On 8/7/06, R Gartz <[EMAIL PROTECTED]> wrote:
Hello, I'm having problems with Deluge. I've done everything the deluge-manual said, but the nodes won't reboot over the air through TOSBase. The nodes do seem to receive some commands over the air, but they do not reboot, however they are saying (through the commandline output) that they shall reboot from image A to image B... but when checking againg with deluge --ping, the nodes still execute image A However, when I plug in one node at the programmer and issue the reboot command, the node reboots.... When I issue an inject command, all the nodes install the new image.. I'm using the correct makerules from /tools/make and I'm using the correct TOSBoot from: /lib/Deluge/TOSBoot/build/micaz/main.ihex (all updated from CVS) Anyone knows what the problem could be? greetings, R. _______________________________________________ Tinyos-help mailing list [email protected] https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
_______________________________________________ Tinyos-help mailing list [email protected] https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
