Indeed that was the problem, thx!
R.
On 8/7/06, Dongyan Chen <[EMAIL PROTECTED]> wrote:
You might want to check your battery voltage. I ran into the same
problem a while ago and it turns out that when the battery voltage is
less than a certain value (I remember it's 2.7V) the flash in the MCU
can't be re-programed.
- Dongyan
On 8/7/06, R Gartz <[EMAIL PROTECTED]> wrote:
> Hello,
>
> I'm having problems with Deluge.
>
> I've done everything the deluge-manual said, but the nodes won't reboot over
> the air through TOSBase.
>
> The nodes do seem to receive some commands over the air, but they do not
> reboot, however they are saying (through the commandline output) that they
> shall reboot from image A to image B... but when checking againg with
> deluge --ping, the nodes still execute image A
> However, when I plug in one node at the programmer and issue the reboot
> command, the node reboots....
> When I issue an inject command, all the nodes install the new image..
>
>
> I'm using the correct makerules from /tools/make and I'm using the correct
> TOSBoot from: /lib/Deluge/TOSBoot/build/micaz/main.ihex
> (all updated from CVS)
>
> Anyone knows what the problem could be?
>
>
> greetings,
>
> R.
>
>
>
>
>
>
> _______________________________________________
> Tinyos-help mailing list
> [email protected]
> https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
>
>
_______________________________________________ Tinyos-help mailing list [email protected] https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
