i've tried everything and it still does not work. Is there any other way of verifying if my micaz motes' hardware is ok? when i turn the switch on the led blinks.
Thank you again. Leonardo Michael Collett ([EMAIL PROTECTED]): > > I think that error generally means it cant see your device. This may be > pointing you in the right direction... > > Mike > -----Original Message----- > From: Fenghua Yuan [mailto:[EMAIL PROTECTED] > Sent: 18 August 2006 18:00 > To: Michael Collett > Subject: Re: [Tinyos-help] Problem when download application to micaz/mib510 > > > Hi, > we found out that is caused by hardware connection problem. Now everything is > ok. > Thank you very much for your help. > > best, > Fenghua > > > On 8/18/06, Michael Collett <[EMAIL PROTECTED]> wrote: > A couple of points: > > You haven't included a node id number after reinstall. I'd also recommend > using /dev/ttyS(n-1) instead of Comn. Also using full stops instead of commas > has been discussed in the archives and some find it works more reliably. > > In your case the command would become something like: > > make micaz reinstall.7 mib510./dev/ttyS5 > > Where 7 is your chosen node id, which should be different for each node (and > usually 0 for the base by convention). > > Another option: > > If you have MoteView (software for visualising surge programmed motes) which > comes with XBow developer kits, then this has a facility for programming > motes. Just look at the tools menu. The file you want to select will be > within the build folder of you application folder. This is useful because you > can set the radio bands and powers without having to change any header files. > > Hope this helps, > > Mike > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] ]On Behalf Of Fenghua Yuan > Sent: 18 August 2006 01:18 > To: [email protected] > Subject: [Tinyos-help] Problem when download application to micaz/mib510 > > > Hi > > I installed the Tinyos-1.1.11 (download from tinyos website) > refer to the link: Windows Installshield Wizard for TinyOS CVS Snapshot > 1.1.11 (less tested, but fresh) > > The compilation for micaz ($make micaz) is finished without error, > but when i try to download the application (e.g. Blink) to the micaz/mib510 > after the compilation, > it stucked, and what was shown on the cygwin screen is: > > $make micaz reinstall mib510,com6 > cp build/micaz/main.srec build/micaz/main.srec.out > installing micaz binary using mib510 > uisp -dprog=mib510 -dserial=com4 --wr_fuse_h=0xd9 -dpart=ATmega128 > --wr_fuse_e=ff > --erase --upload if=build/micaz/main.srec.out > > Does anybody have any idea or suggestion about how to solve this problem? > thanks > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of > Leonardo B. Oliveira > Sent: 20 September 2006 12:50 > To: [email protected] > Subject: [Tinyos-help] flash error(micaz & mib520 & tinyos1.11 & > Blink),any clue? > > > Dear all, > > I' facing the following error: "flash error" > I know this is a common error, but i didn't find messages in the > list describing the error over the mib520. > I have already tried with another micaz and w/ another mib520. > telosb mote is working properly and toscheck is ok. > Also, i can see the telosb w/ motelist command, but i can't see > the micaz -- the motelist is supposed to work w/ micaz as well? > I'm not sure. > Any help will be very appreciated. > > I am using the following cmd: > "make micaz install mib520,com6" and my available COM ports > after the FTDI installation are COM6 and COM7. See: > > [EMAIL PROTECTED] /opt/tinyos-1.x/apps/Blink > $ make micaz install mib520, com6 > mkdir -p build/micaz > compiling Blink to a micaz binary > ncc -o build/micaz/main.exe -Os -finline-limit=100000 -Wall > -Wshadow -DDEF_TOS_ > M_GROUP=0x7d -Wnesc-all -target=micaz > -fnesc-cfile=build/micaz/app.c -board=mic > sb -DIDENT_PROGRAM_NAME="Blink" > -DIDENT_PROGRAM_NAME_BYTES="66,108,105,110,107, > " -DIDENT_USER_ID="Administrador" > -DIDENT_USER_ID_BYTES="65,100,109,105,110,105 > 115,116,114,97,100,111,114,0" -DIDENT_HOSTNAME="scorcese" > -DIDENT_HOSTNAME_BYTE > ="115,99,111,114,99,101,115,101,0" -DIDENT_USER_HASH=0x5baea872L > -DIDENT_UNIX_T > ME=0x45103a59L -I/opt/tinyos-1.x/tos/lib/CC2420Radio Blink.nc > -lm > compiled Blink to build/micaz/main.exe > 1674 bytes in ROM > 48 bytes in RAM > avr-objcopy --output-target=srec build/micaz/main.exe > build/micaz/main.srec > avr-objcopy --output-target=ihex build/micaz/main.exe > build/micaz/main.ihex > writing TOS image > cp build/micaz/main.srec build/micaz/main.srec.out > installing micaz binary with dapa > uisp -dprog=dapa --wr_fuse_h=0xd9 -dpart=ATmega128 > --wr_fuse_e=ff --erase > pulse > Atmel AVR ATmega128 is found. > Erasing device ... > pulse > Reinitializing device > Atmel AVR ATmega128 is found. > > Fuse High Byte set to 0xd9 > > Fuse Extended Byte set to 0xff > sleep 1 > uisp -dprog=dapa --wr_fuse_h=0xd9 -dpart=ATmega128 > --wr_fuse_e=ff --upload if= > uild/micaz/main.srec.out > pulse > Atmel AVR ATmega128 is found. > Uploading: flash > > Fuse High Byte set to 0xd9 > > Fuse Extended Byte set to 0xff > sleep 1 > uisp -dprog=dapa --wr_fuse_h=0xd9 -dpart=ATmega128 > --wr_fuse_e=ff --verify if= > uild/micaz/main.srec.out > pulse > Atmel AVR ATmega128 is found. > Verifying: flash > flash error at address 0x0: file=0x0c, mem=0xff > flash error at address 0x1: file=0x94, mem=0xff > flash error at address 0x2: file=0x46, mem=0xff > flash error at address 0x3: file=0x00, mem=0xff > .... > Fuse High Byte set to 0xd9 > > Fuse Extended Byte set to 0xff > rm -f build/micaz/main.exe.out build/micaz/main.srec.out > > > Thanks in advance, > > -- > Leonardo > > -- > > Cordialmente, > > Leonardo > > "A gente só sabe bem aquilo que não entende". > Guimarães Rosa > _______________________________________________ > Tinyos-help mailing list > [email protected] > https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help > > ------------------------------------------------------------------- > This e-mail and any attachments may contain confidential and/or > privileged material; it is for the intended addressee(s) only. > If you are not a named addressee, you must not use, retain or > disclose such information. > > NPL Management Ltd cannot guarantee that the e-mail or any > attachments are free from viruses. > > NPL Management Ltd. Registered in England and Wales. No: 2937881 > Registered Office: Serco House, 16 Bartley Wood Business Park, > Hook, Hampshire, United Kingdom RG27 9UY > ------------------------------------------------------------------- -- Cordialmente, Leonardo "A gente só sabe bem aquilo que não entende". Guimarães Rosa _______________________________________________ Tinyos-help mailing list [email protected] https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
