Sundaresh,
Is
there an automated .exe installer on the CD or did you just install the tinyos
.rpm file into an existing Cygwin install?
If you
ran the automated .exe I'm not sure what could be wrong.
If you
just installed the tinyos .rpm file you will probably need to install other
stuff from the CD (including the nesC rpm and the other AVR Tools rpm files) -
see the listing at the bottom of page 13 here -> http://www.xbow.com/Support/Support_pdf_files/Getting_Started_Guide.pdf
Hope
this helps!
Bryn
Smith
-----Original Message-----Bryn,
From: sundaresh sundaralingam [mailto:[EMAIL PROTECTED]
Sent: Wednesday, 27 September 2006 7:45 PM
To: Bryn Smith
Subject: Re: [Tinyos-help] make mica2 (error).
I am using Cygwin with version tinyos1.1.10Jan2005cvs-1.cygwin.noarch.rpm. I got this rpm from the Crossbow CD.
As far as I know, I have followed the procedures from the manual.
Thanks.
Sundaresh.
On 9/27/06, Bryn Smith <[EMAIL PROTECTED]> wrote:That is an installation error. It means that it cannot find the nesC for
TinyOS compiler called ncc. What version are you running? What system
are you running on? Linux or Cygwin? Have you installed from source,
rpms or cvs?
If you provide this information it may help. You may also want to go
through the installation procedures carefully.
Regards,
Bryn Smith
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]] On Behalf Of
sundaresh sundaralingam
Sent: Tuesday, 26 September 2006 10:26 PM
To: [email protected]
Subject: [Tinyos-help] make mica2 (error).
Hi all,
I tried make mica2 in the Blink directory and i get this error:
$ make mica2
mkdir -p build/mica2
compiling Blink to a mica2 binary
ncc -o build/mica2/main.exe -Os -I%T/../contrib/xbow/tos/platform/mica2
-finline
-limit=100000 -Wall -Wshadow -DDEF_TOS_AM_GROUP=125 -Wnesc-all
-target=mica2 -fn
esc-cfile=build/mica2/app.c -board=micasb
-DCC1K_DEFAULT_FREQ=RADIO_916BAND_CHAN
NEL_00 -DRADIO_XMIT_POWER=0xFF -DCC2420_TXPOWER=TXPOWER_MAX
-DCC2420_DEF_CHANNEL
=26 -DIDENT_PROGRAM_NAME="Blink"
-DIDENT_PROGRAM_NAME_BYTES="66,108,105,110,107,
0" -DIDENT_USER_HASH=0xba77cf40L -DIDENT_UNIX_TIME=0x4519150bL Blink.nc
-lm
ncc: not found
make: *** [exe0] Error 127
What must I do ?
Thanks.
Sundaresh.
_______________________________________________
Tinyos-help mailing list
[email protected]
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
_______________________________________________ Tinyos-help mailing list [email protected] https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
