Hi, All:
I am trying to let a mica2 base station forward data to a radio modem directly (not through a computer), but have no luck. The base station mote uses mib510 programming board and the radio modem is Elpro 905U-D, they are connected using a serial cable and a "gender changer" (because both of them are of female ends). The radio modem is set at 57600 Baudrate, 8 data bits, 1 stop bit, 0 parity and no flow control. I assume that is the same setting for mib510. Please let me know if this is wrong.
The radio modem works fine. Two radio modems can forward messages between two laptops using cutecom. The mib510 works fine too, the base station can collect data and forward to the laptop that it connects to.
However, when I connect the mib510 to the radio modem directly using a serial cable, they are NOT communicating. The base station is still collecting data (the lights are on), but the radio modem is not getting any. The flash lights of the radio modem isn't flashing at all.
Wondering if anybody else in this mailing lise has done something similar, please let me know if you can see anything I have missed or mistaken. Thanks in advance!
cheers, --ken _______________________________________________ Tinyos-help mailing list [email protected] https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
